본문 바로가기

Audio

HifiBerry DAC+ Pro

Raspberry Pi Model 2에 사용할 DAC으로 Hifiberry DAC+ Pro를 샀다. – 2015.11.6

스위스에 있는 Hifiberry사에 직접 주문하여 거의 20여일이 지난 후에 제품을 받았다.

배송 참 오래 걸리네.

 

 

 


 

 

 

 

 

 

포장과 들어 있는 내용물은 참 단순하다.

Cirrus Logic Audio Card와는 달리 이놈은 박스 조차 없는 다소 허접한 벌크 형태로 배송되어 왔다.

내용물이라고는 그저 Hifiberry DAC+ Pro가 비닐에 담겨져 있고,

라즈베리에 장착하기 위한 기둥과 볼트, 너트가 전부이다.

 

 




 

 

 

 

참 작다.

Cirrus Logic Audio Card는 그래도 이것 저것 기판에 달린 것이 많아서

나름 라즈베리와 거의 같은 크기를 가지고 있다면 

Hifiberry는 라즈베리의 USB와 RJ 포트를 뺀 나머지 크기에 해당하기 때문에

장착 기둥의 높이도 상대적으로 낮게 되어 있다.

 

 

 





 

 

 

 

이 제품이 필요했던 가장 큰 이유. RCA Connector.

Cirrus Logic Audio Card는 입출력이 가능한 다양한 기능을 갖고 있는 반면에

아날로그 출력 단자가 Stereo 단자로 되어 있어서 

Y 케이블로 앰프와 연결해야 하는 단점이 있었다.

이 제품은 인터 케이블을 직접 사용할 수 있는 장점이 있어서 구매해 본 것.

 

 

 



 

 

 

 

라즈베리 기판 위에 바로 꼽는 형태이기 때문에 선이나 별도의 장착을 위한 고려사항이 없다.

기둥 2개만 있으면 된다.

 

 

 



 

 

 

 

중앙 오른쪽 X44, X48이 Clock인데 DAC+ Pro 버전에는 이게 2개가 달려 있다.

지터를 줄이기 위한 고급 사양이다.

DAC Chip은 버브라운사의 PCM5122가 사용되었다.

 

 

The HiFiBerry DAC+ is a high-resolution digital-to-analog converter for the Raspberry Pi Model A+/B+ and 2B. 

This is a special sound card for the Raspberry Pi, that is optimized for one specific use case: the best audio playback quality.

  • Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality (ESS instead of Burr-Brown on DAC+ Light)
  • Hardware volume control. You can control the output volume using "alsamixer" or any application that supports ALSA mixer controls (not available on DAC+ Light)
  • Connects directly to the Raspberry Pi, no additional cables needed
  • No soldering Comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi B+. Mounted in less than a minute.
  • Compatible with Raspberry Pi model A+/B+ and 2
  • Directly powered from the Raspberry Pi, no additional power supply
  • Ultra-low-noise voltage regulator for optimal audio performance
  • Available with different output connectors: RCA or 3.5mm phone jack (DAC+ Light and Pro only available with RCA jacks)
  • Integrated EEPROM for automatic configuration (not DAC+ Light)
    The board is conform to the Raspberry Pi hardware-attached-on-top (HAT) specification.
    Note that this feature is still in development by the Raspberry Pi foundation. You will be able to upgrade your HiFiBerry DAC+ when it is officially available. The sound card already works without this feature.
  • Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi.
  • DAC+ Pro advanced features:
    • Gold-plated connectors: Gold-plated RCA connectors ensure optimal connection to your RCA cables.
    • Dual-domain clock circuit: The DAC+ Pro uses its own on-board ultra-low-jitter clock generator. To have the lowest jitter values, there are 2 different clocks on board: one for 44.1/88.2/176.4 kHz sample rates and another for 48/97/192kHz.
    • Hackable: The board can be modified to allow external power supply for the analog part of the board. Also you can connect external I2S DACs. These features need soldering on the board. This will void warranty, but real hardware hackers have no problems with this.


위의 설명 대로 DAC+ Pro의 고급 사양은

- 금도금 단자

- Dual-Domain clock 회로로 ultra-low-jitter 클락 제너레이터로 서로 다른 주파수 대역을 지원한다.

- Hackable : 외부 전원공급기를 사용할 수 있게 수정할 수 있고, 외부 I2S DAC도 연결할 수 있다. 땜질이 필요하지만...

 

 

 



 

 

 

 

 

이렇게 RCA 인터선을 직접 연결할 수 있으니 stereo to RCA 젠더가 깎아먹는 음질 저하는 생기지 않을 것으로 기대.

그리고 입출력 때문에 가지고 있는 불필요한 회로가 없으니 그 또한 음질적으로 유리하지 않을까 함.

 

 

 

 

 

 

 

 

 

 

기존 Cirrus Logic Audio Card가 장착된 라즈베리 파이의 모습은 이랬었다.

약간 어설픈 모습인 것 같다.

 

그러고 보니 CLAC이나 Hifiberry나 크기는 같군.

마운트 높이만 다르네.

아무래도 CLAC가 이것 저것 단자들이 많이 붙어 있다 보니 마운트 높이가 높아진 것 같다.

 

소리의 첫 느낌은 ATC 스피커 듣다가 JBL 스피커로 바뀐 듯한 느낌이랄까...

좀 더 들어 보고 그 차이를 정리해 볼까 한다.